The size or diameter of your skateboard wheels will noticeably affect your skateboard’s performance. A wheel of large diameter will go faster and weigh a little more than a smaller wheel. A large wheel will also raise you and your deck off the ground higher than a smaller wheel. A smaller wheel will weigh less, sit you closer to the ground, and will be easier to maneuver.
Technical street skaters will prefer wheels on the smaller end of the spectrum as the small wheels’ light weight allows street skaters to perform flip tricks more easily. Transition skaters will usually opt for something larger that will carry more speed.
Skateboard wheel diameter is measured in millimeters and the size range is generally 49mm to 75mm. 26 millimeters may seem insignificant if you haven’t experimented much with different sized skate wheels, but even a couple millimeters will make a difference to experienced skaters. To break down wheel size by general riding style, see the table below.
42mm - 52mm
Technical street skating wheels
52mm - 55mm
All around skating, geared more towards street
55mm - 60mm
All around skating, geared more towards transition
60mm - 65mm
Transition skating wheels
65mm - 70mm
Some transition wheels in this size, many cruiser & longboard wheels
70mm+
Basically all downhill longboard wheels
WHEEL DUROMETER
The hardness or durometer of a skateboard wheel determines how much grip the wheel has and the amount of shock it can absorb. To break it down, a softer wheel will compress when pressure is applied to it, giving it more grip and allowing it to absorb more shock. A harder wheel will barely compress under pressure, giving it less grip, and less shock absorption. A soft wheel will create a very smooth ride, but hard wheels are preferred by most street and transition skaters for their responsiveness.
Riding hard wheels will allow you to feel everything you are rolling over. This awareness will be beneficial as you navigate through rolling transitions in the park or negotiate a collage of concrete and asphalt in the urban jungle. Hard wheels will also respond directly to your movements. When you snap into an ollie, all of the pressure you apply transfers directly to your deck and wheels, giving you maximum pop.
Softer wheelsare great for cruising around and bombing hills at high speeds. They absorb a lot of shock from the road creating a super smooth ride. For some awesome cruiser wheels, take a look at the lineup fromOJ Wheels.
Soft wheels are generally not ideal for street or transition skating, as their grippy-ness will cause them to stick to obstacles rather than grind or slide across them. They are also less responsive to your movements, which makes tricks like ollies and kickflips more difficult.
Wheel durometer is most commonly measured using the “A” scale, the same one used to determine bushing hardness. The A scale is a ranking system of numbers followed by the letter “A”. The larger the number, the higher the durometer, and the harder the wheel. For example 101A would be a very hard skateboard wheel, while 75A would be a very soft one. You can usually see the durometer listed in this manner on a skateboard wheel, along with the wheel’s size. Image of a wheel with size and durometer printed on it. Almost all street and transition wheels are harder than 98A. Cruising wheels are usually around 78A, but can be anywhere between 78A and 90A.
Bones Wheelsuses a “B” rating scale to signify durometer. The B scale is a different way of measuring the same thing, and is mainly used for the hardest wheels on the spectrum. The conversion is simple, the B scale reads 20 values below the A scale:
Lubricant and cleaning kits are used to keep the bearings in the wheels turning quickly and smoothly; if this is your first board, these upgrades are not necessary. Make sure you love to ride first!
Nothing's goes with a new set of wheels better than a fresh set of bearings. If you're not sure what bearings do, they're what makes the wheels (and the entire board) move. They fit tightly and stay inside the wheel hubs using pressure. All skateboard bearings are sold in sets of 8 (2 per wheel).
If the board is to be used for all-around riding or getting around town, spacers are NOT needed. Spacers sit between the bearings in the wheel and provide additional stability for more advanced riding.
Thank you! We appreciate your feedback. Your review will be moderated.
Maybe I got unlucky.
JDmiller on 08/11/20
I skated around with them for 4 little sessions and completely busted one wheel, a giant chunk an inch long and half an inch deep was just ripped out of the side. I loved these wheels but if a simple Ollie is gonna trash em like that I don't know. Maybe i ran something over that caused it to start to split.
Greatness
Lord Huncho Capone on 06/26/20
Love this brand, just started skateboarding and I had to support the Washington born company
Pour me a mini glass of super juice
Average joe on 08/17/19
Perfect for crushing it, still maintains speed over rough terrain. If your looking to kill it in your shitty neighborhood these are the wheels for you!!
Amazing
Jon on 05/12/20
Best cruiser out there, perfect for putting on any board you got around and you don't even need a riser. So fast you won't be able to stop, go over any type of road, it's awesome!
Smooth wheels
Rafael on 01/31/21
Best Wheels great Quality Smooth Wheels
Awesome wheels!
Kybuckles on 05/03/20
Super fast and so smooth. Roll right over cracks and blast through dirt and grass. I also have a pink set love the looks of these black minis
Classic
OLSKEWL on 03/05/20
Slap some super juice on your deck n feel the juice. Love them Super juice's.
white rims on. blender
SKatepassion on 06/15/20
OJ;s super fast bomb speed skrt power slide pop nose slide
Great!
Brian B. on 06/17/24
I used these OJ Super Juice wheels with Independent bearings to make a cruiser board and they work great. Exactly what I was looking for: fast, smooth, and super fun!
